← My Auto Racer All cars Chrysler 0-60 Comparisons Answers

Chrysler Crossfire Roadster

The Chrysler Crossfire Roadster reaches 60 mph in 6.50 s (100 km/h in 7.08 s) and covers a standing quarter mile in 15.07 s, tripping the lights at 93.3 mph. It clears the first 60 ft in 2.35 s and the eighth mile in 9.74 s.

Simulated, not measured — computed from published kerb mass, rated power, gearing and drivetrain, then fitted to this car’s own published acceleration figures. Dry asphalt, 20 °C, sea level, 1 ft rollout.

Chrysler Crossfire Roadster MINI JCW Convertible

Pick who it runs against, then watch it happen — and change the surface, the weather or the distance and run it again.

Down the strip

Standing start Chrysler Crossfire Roadster
0–60 mph6.50 s
0–100 km/h7.08 s
0–100 mph—
60 ft2.35 s
1/8 mile9.74 s
1/4 mile15.07 s
Trap speed93.3 mph

About the Crossfire Roadster

The 2005 Chrysler Crossfire Roadster is a rear-drive naturally aspirated roadster of 1,432 kg with 215 bhp, which works out at 150 bhp per tonne. Rear drive and 150 bhp per tonne make the launch the hard part of the run: 60 ft takes 2.35 s. Against the 14,946 cars in the set it is the 3,876th quickest to 60 mph, and the 16th quickest of the 76 Chryslers here. Its 93.3 mph trap speed sits about where its 0-60 puts it, so it launches and pulls in roughly equal measure. The simulation is trimmed to 9 of 9 published acceleration figures for this car.

On paper

Specification Chrysler Crossfire Roadster
Year2005
Power215 hp (160 kW)
Kerb mass1,432 kg
Power to weight150 bhp/t
DrivetrainRear drive
Gears6
EngineNaturally aspirated
Top speed93 mph (150 km/h), quoted

Similar cars

CarYear 0–601/4 mileTrapPower
MINI JCW Convertible20096.55 s15.03 s94.7 mph208 bhp
BMW Z4 Roadster (E89) sDrive2.0i 184 Auto20096.50 s14.95 s94.0 mph181 bhp
MINI Cooper SE Convertible 32.6 KWh 18420236.50 s15.34 s86.5 mph181 bhp

Picked for a fair race, not just a matching 0-60: pace, power-to-weight and body shape all count, and at most one is from the same maker.

Where these times sit

0-60 under 7 seconds4,651 cars0-100 km/h under 8 seconds5,602 carsSlower in the wetevery car, re-runThe cost of altitudeevery car, re-runThe cost of a passengerevery car, re-run
Chrysler 0-60 timesevery modelFastest roadsters682 carsFastest cars of the 2000s5,138 cars
Put this race on your own page

Free to use anywhere, no attribution required beyond the credit line included above. How to embed →

Questions

What is the Chrysler Crossfire Roadster 0-60 time?
The Chrysler Crossfire Roadster reaches 60 mph in 6.50 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. That makes it the 3,876th quickest of the 14,946 cars in the set.
What is the Chrysler Crossfire Roadster quarter mile time?
15.07 s at 93.3 mph. It reaches the eighth mile in 9.74 s and clears the first 60 ft in 2.35 s. These are theoretical times from a physics simulation, not measured runs.
How much power does the Chrysler Crossfire Roadster have?
215 bhp and 1,432 kg, which is 150 bhp per tonne. It is rear-drive, naturally aspirated, with 6 gears and a quoted top speed of 150 km/h. These are theoretical times from a physics simulation, not measured runs.
What cars are comparable to the Chrysler Crossfire Roadster?
Closest here on pace: MINI JCW Convertible (6.55 s), BMW Z4 Roadster (E89) sDrive2.0i 184 Auto (6.50 s), MINI Cooper SE Convertible 32.6 KWh 184 (6.50 s). Each one can be raced against the Chrysler Crossfire Roadster in the panel at the top of this page. These are theoretical times from a physics simulation, not measured runs.
Are these real measured times?
No. Every figure on this page is produced by a physics simulation, not by a stopwatch at a drag strip. The Chrysler Crossfire Roadster is modelled from its published kerb mass, rated power, drivetrain and gearing, then trimmed until it reproduces 9 of its 9 published acceleration figures. Conditions are the same for every car in the set: dry asphalt, 20 °C, sea level, 1 ft rollout.

Figures regenerated 2026-10-12. Every number on this page is computed by the simulator at build time, so the page and the app can never disagree.