← My Auto Racer All cars Holden 0-60 Comparisons Answers

Holden Vectra 2.0 DTI 101

The Holden Vectra 2.0 DTI 101 reaches 60 mph in 11.82 s (100 km/h in 12.55 s) and covers a standing quarter mile in 18.54 s, tripping the lights at 75.7 mph. It clears the first 60 ft in 3.06 s and the eighth mile in 12.00 s.

Simulated, not measured — computed from published kerb mass, rated power, gearing and drivetrain, then fitted to this car’s own published acceleration figures. Dry asphalt, 20 °C, sea level, 1 ft rollout.

Holden Vectra 2.0 DTI 101 SEAT Exeo ST 1.6 102

Pick who it runs against, then watch it happen — and change the surface, the weather or the distance and run it again.

Down the strip

Standing start Holden Vectra 2.0 DTI 101
0–60 mph11.82 s
0–100 km/h12.55 s
0–100 mph—
60 ft3.06 s
1/8 mile12.00 s
1/4 mile18.54 s
Trap speed75.7 mph

About the Vectra 2.0 DTI 101

The 2002 Holden Vectra 2.0 DTI 101 is a front-drive turbodiesel saloon of 1,503 kg with 99 bhp, which works out at 66 bhp per tonne. Front drive caps what it can put down off the line — 60 ft takes 3.06 s — so most of what it has to give arrives once it is already moving. Against the 14,946 cars in the set it is the 12,643rd quickest to 60 mph, and the 87th quickest of the 110 Holdens here. Its 75.7 mph trap speed sits about where its 0-60 puts it, so it launches and pulls in roughly equal measure. The simulation is trimmed to 2 of 2 published acceleration figures for this car.

On paper

Specification Holden Vectra 2.0 DTI 101
Year2002
Power99 hp (74 kW)
Kerb mass1,503 kg
Power to weight66 bhp/t
DrivetrainFront drive
Gears5
EngineTurbodiesel
Top speed119 mph (192 km/h), quoted

Similar cars

CarYear 0–601/4 mileTrapPower
SEAT Exeo ST 1.6 102200911.91 s18.55 s74.9 mph101 bhp
Saab 9-5 2.2 TiD 120200111.79 s18.63 s75.9 mph118 bhp
Daewoo Cielo/Nexia 1.5 CNG 71199411.75 s18.43 s73.6 mph70 bhp

Picked for a fair race, not just a matching 0-60: pace, power-to-weight and body shape all count, and at most one is from the same maker.

Where these times sit

Slower in the wetevery car, re-runThe cost of altitudeevery car, re-runThe cost of a passengerevery car, re-run
Holden 0-60 timesevery modelFastest saloon cars3,808 carsFastest cars of the 2000s5,138 cars
Put this race on your own page

Free to use anywhere, no attribution required beyond the credit line included above. How to embed →

Questions

What is the Holden Vectra 2.0 DTI 101 0-60 time?
The Holden Vectra 2.0 DTI 101 reaches 60 mph in 11.82 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. That makes it the 12,643rd quickest of the 14,946 cars in the set.
What is the Holden Vectra 2.0 DTI 101 quarter mile time?
18.54 s at 75.7 mph. It reaches the eighth mile in 12.00 s and clears the first 60 ft in 3.06 s. These are theoretical times from a physics simulation, not measured runs.
How much power does the Holden Vectra 2.0 DTI 101 have?
99 bhp and 1,503 kg, which is 66 bhp per tonne. It is front-drive, turbodiesel, with 5 gears and a quoted top speed of 192 km/h. These are theoretical times from a physics simulation, not measured runs.
What cars are comparable to the Holden Vectra 2.0 DTI 101?
Closest here on pace: SEAT Exeo ST 1.6 102 (11.91 s), Saab 9-5 2.2 TiD 120 (11.79 s), Daewoo Cielo/Nexia 1.5 CNG 71 (11.75 s). Each one can be raced against the Holden Vectra 2.0 DTI 101 in the panel at the top of this page. These are theoretical times from a physics simulation, not measured runs.
Are these real measured times?
No. Every figure on this page is produced by a physics simulation, not by a stopwatch at a drag strip. The Holden Vectra 2.0 DTI 101 is modelled from its published kerb mass, rated power, drivetrain and gearing, then trimmed until it reproduces 2 of its 2 published acceleration figures. Conditions are the same for every car in the set: dry asphalt, 20 °C, sea level, 1 ft rollout.

Figures regenerated 2026-10-12. Every number on this page is computed by the simulator at build time, so the page and the app can never disagree.