← My Auto Racer All cars Peugeot 0-60 Comparisons Answers

Peugeot Tepee Partner 1.6 VTi 120 BVM5

The Peugeot Tepee Partner 1.6 VTi 120 BVM5 reaches 60 mph in 10.93 s (100 km/h in 11.58 s) and covers a standing quarter mile in 18.22 s, tripping the lights at 77.3 mph. It clears the first 60 ft in 3.08 s and the eighth mile in 11.85 s.

Simulated, not measured — computed from published kerb mass, rated power, gearing and drivetrain, then fitted to this car’s own published acceleration figures. Dry asphalt, 20 °C, sea level, 1 ft rollout.

Peugeot Tepee Partner 1.6 VTi 120 BVM5 SEAT Alhambra 1.8 T 150

Pick who it runs against, then watch it happen — and change the surface, the weather or the distance and run it again.

Down the strip

Standing start Peugeot Tepee Partner 1.6 VTi 120 BVM5
0–60 mph10.93 s
0–100 km/h11.58 s
0–100 mph—
60 ft3.08 s
1/8 mile11.85 s
1/4 mile18.22 s
Trap speed77.3 mph

About the Tepee Partner 1.6 VTi 120 BVM5

The 2008 Peugeot Tepee Partner 1.6 VTi 120 BVM5 is a front-drive naturally aspirated MPV of 1,410 kg with 118 bhp, which works out at 84 bhp per tonne. Front drive caps what it can put down off the line — 60 ft takes 3.08 s — so most of what it has to give arrives once it is already moving. Against the 14,946 cars in the set it is the 11,575th quickest to 60 mph, and the 249th quickest of the 456 Peugeots here. Its 77.3 mph trap speed sits about where its 0-60 puts it, so it launches and pulls in roughly equal measure. The simulation is trimmed to 2 of 2 published acceleration figures for this car.

On paper

Specification Peugeot Tepee Partner 1.6 VTi 120 BVM5
Year2008
Power118 hp (88 kW)
Kerb mass1,410 kg
Power to weight84 bhp/t
DrivetrainFront drive
Gears5
EngineNaturally aspirated
Top speed110 mph (177 km/h), quoted

Similar cars

CarYear 0–601/4 mileTrapPower
SEAT Alhambra 1.8 T 150200010.96 s18.13 s77.2 mph148 bhp
SEAT Alhambra 1.9 TDI 130200011.11 s18.21 s76.5 mph129 bhp
SEAT Alhambra 1.8 Turbo 150199610.90 s17.99 s76.8 mph148 bhp

Picked for a fair race, not just a matching 0-60: pace, power-to-weight and body shape all count, and at most one is from the same maker.

Head to head

Citroen Berlingo BlueHDi 130 (Mk3) vs Peugeot Tepee Partner 1.6 VTi 120 BVM5Full comparison

Where these times sit

Slower in the wetevery car, re-runThe cost of altitudeevery car, re-runThe cost of a passengerevery car, re-run
Peugeot 0-60 timesevery modelFastest MPVs and people carriers478 carsFastest cars of the 2000s5,138 cars
Put this race on your own page

Free to use anywhere, no attribution required beyond the credit line included above. How to embed →

Questions

What is the Peugeot Tepee Partner 1.6 VTi 120 BVM5 0-60 time?
The Peugeot Tepee Partner 1.6 VTi 120 BVM5 reaches 60 mph in 10.93 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. That makes it the 11,575th quickest of the 14,946 cars in the set.
What is the Peugeot Tepee Partner 1.6 VTi 120 BVM5 quarter mile time?
18.22 s at 77.3 mph. It reaches the eighth mile in 11.85 s and clears the first 60 ft in 3.08 s. These are theoretical times from a physics simulation, not measured runs.
How much power does the Peugeot Tepee Partner 1.6 VTi 120 BVM5 have?
118 bhp and 1,410 kg, which is 84 bhp per tonne. It is front-drive, naturally aspirated, with 5 gears and a quoted top speed of 177 km/h. These are theoretical times from a physics simulation, not measured runs.
What cars are comparable to the Peugeot Tepee Partner 1.6 VTi 120 BVM5?
Closest here on pace: SEAT Alhambra 1.8 T 150 (10.96 s), SEAT Alhambra 1.9 TDI 130 (11.11 s), SEAT Alhambra 1.8 Turbo 150 (10.90 s). Each one can be raced against the Peugeot Tepee Partner 1.6 VTi 120 BVM5 in the panel at the top of this page. These are theoretical times from a physics simulation, not measured runs.
Are these real measured times?
No. Every figure on this page is produced by a physics simulation, not by a stopwatch at a drag strip. The Peugeot Tepee Partner 1.6 VTi 120 BVM5 is modelled from its published kerb mass, rated power, drivetrain and gearing, then trimmed until it reproduces 2 of its 2 published acceleration figures. Conditions are the same for every car in the set: dry asphalt, 20 °C, sea level, 1 ft rollout.

Figures regenerated 2026-10-12. Every number on this page is computed by the simulator at build time, so the page and the app can never disagree.