← My Auto Racer All cars SEAT 0-60 Comparisons Answers

SEAT Cordoba Vario 1.9 TDI 90 (1999)

The SEAT Cordoba Vario 1.9 TDI 90 (1999) reaches 60 mph in 11.67 s (100 km/h in 12.45 s) and covers a standing quarter mile in 18.51 s, tripping the lights at 74.3 mph. It clears the first 60 ft in 2.94 s and the eighth mile in 11.88 s.

Simulated, not measured — computed from published kerb mass, rated power, gearing and drivetrain, then fitted to this car’s own published acceleration figures. Dry asphalt, 20 °C, sea level, 1 ft rollout.

SEAT Cordoba Vario 1.9 TDI 90 (1999) Lancia Prisma 1.9 Turbo D 80

Pick who it runs against, then watch it happen — and change the surface, the weather or the distance and run it again.

Down the strip

Standing start SEAT Cordoba Vario 1.9 TDI 90 (1999)
0–60 mph11.67 s
0–100 km/h12.45 s
0–100 mph—
60 ft2.94 s
1/8 mile11.88 s
1/4 mile18.51 s
Trap speed74.3 mph

About the Cordoba Vario 1.9 TDI 90

The 1999 SEAT Cordoba Vario 1.9 TDI 90 (1999) is a front-drive turbodiesel car of 1,174 kg with 89 bhp, which works out at 75 bhp per tonne. Front drive caps what it can put down off the line — 60 ft takes 2.94 s — so most of what it has to give arrives once it is already moving. Against the 14,946 cars in the set it is the 12,452nd quickest to 60 mph, and the 116th quickest of the 192 SEATs here. Its 74.3 mph trap speed sits about where its 0-60 puts it, so it launches and pulls in roughly equal measure. The simulation is trimmed to 2 of 2 published acceleration figures for this car.

On paper

Specification SEAT Cordoba Vario 1.9 TDI 90 (1999)
Year1999
Power89 hp (66 kW)
Kerb mass1,174 kg
Power to weight75 bhp/t
DrivetrainFront drive
Gears5
EngineTurbodiesel
Top speed109 mph (176 km/h), quoted

Similar cars

CarYear 0–601/4 mileTrapPower
Lancia Prisma 1.9 Turbo D 80198311.64 s18.50 s74.1 mph79 bhp
Dacia Sandero 1.5 dCi 85200811.72 s18.54 s73.8 mph84 bhp
Subaru Trezia 1.4D 90201011.70 s18.40 s73.7 mph89 bhp

Picked for a fair race, not just a matching 0-60: pace, power-to-weight and body shape all count, and at most one is from the same maker.

Where these times sit

Slower in the wetevery car, re-runThe cost of altitudeevery car, re-runThe cost of a passengerevery car, re-run
SEAT 0-60 timesevery modelFastest diesel cars4,019 carsFastest cars of the 1990s2,649 cars
Put this race on your own page

Free to use anywhere, no attribution required beyond the credit line included above. How to embed →

Questions

What is the SEAT Cordoba Vario 1.9 TDI 90 (1999) 0-60 time?
The SEAT Cordoba Vario 1.9 TDI 90 (1999) reaches 60 mph in 11.67 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. That makes it the 12,452nd quickest of the 14,946 cars in the set.
What is the SEAT Cordoba Vario 1.9 TDI 90 (1999) quarter mile time?
18.51 s at 74.3 mph. It reaches the eighth mile in 11.88 s and clears the first 60 ft in 2.94 s. These are theoretical times from a physics simulation, not measured runs.
How much power does the SEAT Cordoba Vario 1.9 TDI 90 (1999) have?
89 bhp and 1,174 kg, which is 75 bhp per tonne. It is front-drive, turbodiesel, with 5 gears and a quoted top speed of 176 km/h. These are theoretical times from a physics simulation, not measured runs.
What cars are comparable to the SEAT Cordoba Vario 1.9 TDI 90 (1999)?
Closest here on pace: Lancia Prisma 1.9 Turbo D 80 (11.64 s), Dacia Sandero 1.5 dCi 85 (11.72 s), Subaru Trezia 1.4D 90 (11.70 s). Each one can be raced against the SEAT Cordoba Vario 1.9 TDI 90 (1999) in the panel at the top of this page. These are theoretical times from a physics simulation, not measured runs.
Are these real measured times?
No. Every figure on this page is produced by a physics simulation, not by a stopwatch at a drag strip. The SEAT Cordoba Vario 1.9 TDI 90 (1999) is modelled from its published kerb mass, rated power, drivetrain and gearing, then trimmed until it reproduces 2 of its 2 published acceleration figures. Conditions are the same for every car in the set: dry asphalt, 20 °C, sea level, 1 ft rollout.

Figures regenerated 2026-10-12. Every number on this page is computed by the simulator at build time, so the page and the app can never disagree.