← My Auto Racer All cars Comparisons Answers 0-60 by make Fastest lists

Peugeot 208 1.2 PureTech 130 vs Hyundai Bayon 1.0 TGD-i 100

Over a standing quarter mile on dry asphalt the Peugeot 208 1.2 PureTech 130 is the quicker car, covering it in 16.11 s at 85.8 mph against the Hyundai Bayon 1.0 TGD-i 100’s 17.25 s — a margin of 1.14 s. To 60 mph the Peugeot 208 1.2 PureTech 130 takes 7.84 s and the Hyundai Bayon 1.0 TGD-i 100 9.73 s.

Simulated, not measured — computed from each car’s published kerb mass, rated power and drivetrain, then fitted to its own published acceleration figures. Dry asphalt, 20 °C, sea level, 1 ft rollout.

Peugeot 208 1.2 PureTech 130 Hyundai Bayon 1.0 TGD-i 100

Watch the run in full — then change the surface, the weather or the distance and run it again.

Down the strip

Standing startPeugeot 208 1.2 PureTech 130Hyundai Bayon 1.0 TGD-i 100
0–60 mph7.84 s9.73 s
0–100 mph——
60 ft2.50 s2.58 s
1/8 mile10.39 s11.08 s
1/4 mile16.11 s17.25 s
Trap speed85.8 mph79.8 mph

Each car is trimmed to its own published figures — 2/2 for the Peugeot 208 1.2 PureTech 130, 2/2 for the Hyundai Bayon 1.0 TGD-i 100 — so a heavier car can still be the quicker one if that is what it tests.

On paper

SpecificationPeugeot 208 1.2 PureTech 130Hyundai Bayon 1.0 TGD-i 100
Year20202022
Power129 bhp99 bhp
Kerb mass1,158 kg1,095 kg
Power to weight111 bhp/t91 bhp/t
DrivetrainFront driveFront drive
EngineTurbochargedTurbocharged

Where these times sit

0-60 under 8 seconds6,521 cars0-100 km/h under 10 seconds9,071 carsSlower in the wetevery car, re-runThe cost of altitudeevery car, re-runThe cost of a passengerevery car, re-run
Peugeot 0-60 timesevery modelHyundai 0-60 timesevery modelFastest cars of the 2020s868 cars

Try another matchup

Put this race on your own page

Free to use anywhere, no attribution required beyond the credit line included above. How to embed →

Or open the full simulator →

Questions

Is the Peugeot 208 1.2 PureTech 130 or the Hyundai Bayon 1.0 TGD-i 100 faster?
The Peugeot 208 1.2 PureTech 130. Over a standing quarter mile it runs 16.11 s to the Hyundai Bayon 1.0 TGD-i 100's 17.25 s, a margin of 1.14 s, and it reaches 60 mph in 7.84 s against 9.73 s. These are theoretical times from a physics simulation, not measured runs.
What is the Peugeot 208 1.2 PureTech 130 0-60 time?
The Peugeot 208 1.2 PureTech 130 reaches 60 mph in 7.84 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. It covers the standing quarter mile in 16.11 s at 85.8 mph.
What is the Hyundai Bayon 1.0 TGD-i 100 0-60 time?
The Hyundai Bayon 1.0 TGD-i 100 reaches 60 mph in 9.73 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. It covers the standing quarter mile in 17.25 s at 79.8 mph.
What trap speed does each car run?
The Peugeot 208 1.2 PureTech 130 trips the lights at 85.8 mph and the Hyundai Bayon 1.0 TGD-i 100 at 79.8 mph at the end of the quarter mile. These are theoretical times from a physics simulation, not measured runs.
Are these real measured times?
No. Every time on this page is produced by a physics simulation, not by a stopwatch at a drag strip. Each car is modelled from its published kerb mass, rated power, drivetrain and gearing, then trimmed until it matches its own published acceleration figures — 2 of 2 for the Peugeot 208 1.2 PureTech 130 and 2 of 2 for the Hyundai Bayon 1.0 TGD-i 100. Conditions are identical for both cars: dry asphalt, 20 °C, sea level, 1 ft rollout.

Figures regenerated 2026-10-12. Every number on this page is computed by the simulator at build time, so the page and the app can never disagree.