Peugeot 308 BlueHDi 130 (Mk2) vs Renault Captur 1.3 TCe 154
Over a standing quarter mile on dry asphalt the Renault Captur 1.3 TCe 154 is the quicker car,
covering it in 16.09 s at
86.8 mph against the Peugeot 308 BlueHDi 130 (Mk2)’s
16.83 s — a margin of
0.74 s. To 60 mph the Renault Captur 1.3 TCe 154 takes
7.75 s and the Peugeot 308 BlueHDi 130 (Mk2)
8.85 s.
Simulated, not measured — computed from each car’s published kerb mass,
rated power and drivetrain, then fitted to its own published acceleration figures.
Dry asphalt, 20 °C, sea level, 1 ft rollout.
Watch the run in full — then change the surface, the weather
or the distance and run it again.
Down the strip
Standing start
Peugeot 308 BlueHDi 130 (Mk2)
Renault Captur 1.3 TCe 154
0–60 mph
8.85 s
7.75 s
0–100 mph
—
—
60 ft
2.56 s
2.55 s
1/8 mile
10.83 s
10.42 s
1/4 mile
16.83 s
16.09 s
Trap speed
83.1 mph
86.8 mph
Each car is trimmed to its own published figures —
2/2 for the Peugeot 308 BlueHDi 130 (Mk2),
2/2 for the Renault Captur 1.3 TCe 154 —
so a heavier car can still be the quicker one if that is what it tests.
Is the Peugeot 308 BlueHDi 130 (Mk2) or the Renault Captur 1.3 TCe 154 faster?
The Renault Captur 1.3 TCe 154. Over a standing quarter mile it runs 16.09 s to the Peugeot 308 BlueHDi 130 (Mk2)'s 16.83 s, a margin of 0.74 s, and it reaches 60 mph in 7.75 s against 8.85 s. These are theoretical times from a physics simulation, not measured runs.
What is the Peugeot 308 BlueHDi 130 (Mk2) 0-60 time?
The Peugeot 308 BlueHDi 130 (Mk2) reaches 60 mph in 8.85 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. It covers the standing quarter mile in 16.83 s at 83.1 mph.
What is the Renault Captur 1.3 TCe 154 0-60 time?
The Renault Captur 1.3 TCe 154 reaches 60 mph in 7.75 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. It covers the standing quarter mile in 16.09 s at 86.8 mph.
What trap speed does each car run?
The Peugeot 308 BlueHDi 130 (Mk2) trips the lights at 83.1 mph and the Renault Captur 1.3 TCe 154 at 86.8 mph at the end of the quarter mile. These are theoretical times from a physics simulation, not measured runs.
Are these real measured times?
No. Every time on this page is produced by a physics simulation, not by a stopwatch at a drag strip. Each car is modelled from its published kerb mass, rated power, drivetrain and gearing, then trimmed until it matches its own published acceleration figures — 2 of 2 for the Peugeot 308 BlueHDi 130 (Mk2) and 2 of 2 for the Renault Captur 1.3 TCe 154. Conditions are identical for both cars: dry asphalt, 20 °C, sea level, 1 ft rollout.
Figures regenerated 2026-10-12. Every number on this page is computed by the simulator at build time, so the page and the app can never disagree.