← My Auto Racer All cars Alfa Romeo 0-60 Comparisons Answers

Alfa Romeo MiTo 1.6 JTDm 120

The Alfa Romeo MiTo 1.6 JTDm 120 reaches 60 mph in 8.51 s (100 km/h in 9.52 s) and covers a standing quarter mile in 16.65 s, tripping the lights at 82.6 mph. It clears the first 60 ft in 2.51 s and the eighth mile in 10.71 s.

Simulated, not measured — computed from published kerb mass, rated power, gearing and drivetrain, then fitted to this car’s own published acceleration figures. Dry asphalt, 20 °C, sea level, 1 ft rollout.

Alfa Romeo MiTo 1.6 JTDm 120 Volvo C30 2.0 D 136 (2006)

Pick who it runs against, then watch it happen — and change the surface, the weather or the distance and run it again.

Down the strip

Standing start Alfa Romeo MiTo 1.6 JTDm 120
0–60 mph8.51 s
0–100 km/h9.52 s
0–100 mph—
60 ft2.51 s
1/8 mile10.71 s
1/4 mile16.65 s
Trap speed82.6 mph

About the MiTo 1.6 JTDm 120

The 2008 Alfa Romeo MiTo 1.6 JTDm 120 is a front-drive turbodiesel car of 1,180 kg with 118 bhp, which works out at 100 bhp per tonne. Front drive caps what it can put down off the line — 60 ft takes 2.51 s — so most of what it has to give arrives once it is already moving. Against the 14,946 cars in the set it is the 7,527th quickest to 60 mph, and the 124th quickest of the 268 Alfa Romeos here. It leaves better than it pulls: 82.6 mph at the lights is only the 8,579th highest here, so its 0-60 flatters what it does further out. The simulation is trimmed to 2 of 2 published acceleration figures for this car.

On paper

Specification Alfa Romeo MiTo 1.6 JTDm 120
Year2008
Power118 hp (88 kW)
Kerb mass1,180 kg
Power to weight100 bhp/t
DrivetrainFront drive
Gears6
EngineTurbodiesel
Top speed123 mph (198 km/h), quoted

Similar cars

CarYear 0–601/4 mileTrapPower
Volvo C30 2.0 D 136 (2006)20068.51 s16.60 s82.6 mph134 bhp
Volvo C30 2.0 D3 15020098.51 s16.60 s82.6 mph148 bhp
Ford Focus 4dr 2.0 TDCi 13620088.48 s16.59 s82.8 mph134 bhp

Picked for a fair race, not just a matching 0-60: pace, power-to-weight and body shape all count, and at most one is from the same maker.

Where these times sit

0-60 under 10 seconds10,136 cars0-100 km/h under 10 seconds9,062 carsSlower in the wetevery car, re-runThe cost of altitudeevery car, re-runThe cost of a passengerevery car, re-run
Alfa Romeo 0-60 timesevery modelFastest diesel cars4,019 carsFastest cars of the 2000s5,138 cars
Put this race on your own page

Free to use anywhere, no attribution required beyond the credit line included above. How to embed →

Questions

What is the Alfa Romeo MiTo 1.6 JTDm 120 0-60 time?
The Alfa Romeo MiTo 1.6 JTDm 120 reaches 60 mph in 8.51 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. That makes it the 7,527th quickest of the 14,946 cars in the set.
What is the Alfa Romeo MiTo 1.6 JTDm 120 quarter mile time?
16.65 s at 82.6 mph. It reaches the eighth mile in 10.71 s and clears the first 60 ft in 2.51 s. These are theoretical times from a physics simulation, not measured runs.
How much power does the Alfa Romeo MiTo 1.6 JTDm 120 have?
118 bhp and 1,180 kg, which is 100 bhp per tonne. It is front-drive, turbodiesel, with 6 gears and a quoted top speed of 198 km/h. These are theoretical times from a physics simulation, not measured runs.
What cars are comparable to the Alfa Romeo MiTo 1.6 JTDm 120?
Closest here on pace: Volvo C30 2.0 D 136 (2006) (8.51 s), Volvo C30 2.0 D3 150 (8.51 s), Ford Focus 4dr 2.0 TDCi 136 (8.48 s). Each one can be raced against the Alfa Romeo MiTo 1.6 JTDm 120 in the panel at the top of this page. These are theoretical times from a physics simulation, not measured runs.
Are these real measured times?
No. Every figure on this page is produced by a physics simulation, not by a stopwatch at a drag strip. The Alfa Romeo MiTo 1.6 JTDm 120 is modelled from its published kerb mass, rated power, drivetrain and gearing, then trimmed until it reproduces 2 of its 2 published acceleration figures. Conditions are the same for every car in the set: dry asphalt, 20 °C, sea level, 1 ft rollout.

Figures regenerated 2026-10-12. Every number on this page is computed by the simulator at build time, so the page and the app can never disagree.