The Audi A1 citycarver 1.5 35 TFSI S tronic 150 reaches 60 mph in 6.96 s (100 km/h in 7.34 s) and covers a standing quarter mile in 15.37 s, tripping the lights at 91.5 mph. It clears the first 60 ft in 2.48 s and the eighth mile in 10.01 s.
Simulated, not measured — computed from published kerb mass, rated power, gearing and
drivetrain, then fitted to this car’s own published acceleration figures.
Dry asphalt, 20 °C, sea level, 1 ft rollout.
Audi A1 citycarver 1.5 35 TFSI S tronic 150Alfa Romeo Giulietta 1.4 TB MultiAir 170 (2016)
Pick who it runs against, then watch it happen — and change the surface,
the weather or the distance and run it again.
Down the strip
Standing start
Audi A1 citycarver 1.5 35 TFSI S tronic 150
0–60 mph
6.96 s
0–100 km/h
7.34 s
0–100 mph
—
60 ft
2.48 s
1/8 mile
10.01 s
1/4 mile
15.37 s
Trap speed
91.5 mph
About the A1 citycarver 1.5 35 TFSI S tronic 150
The 2020 Audi A1 citycarver 1.5 35 TFSI S tronic 150 is a front-drive turbocharged car of 1,205 kg with 148 bhp, which works out at 122 bhp per tonne. Front drive caps what it can put down off the line — 60 ft takes 2.48 s — so most of what it has to give arrives once it is already moving. Against the 14,946 cars in the set it is the 4,563rd quickest to 60 mph, and the 554th quickest of the 1320 Audis here. Its 91.5 mph trap speed sits about where its 0-60 puts it, so it launches and pulls in roughly equal measure. The simulation is trimmed to 2 of 2 published acceleration figures for this car.
Free to use anywhere, no attribution required beyond the credit line included above. How to embed →
Questions
What is the Audi A1 citycarver 1.5 35 TFSI S tronic 150 0-60 time?
The Audi A1 citycarver 1.5 35 TFSI S tronic 150 reaches 60 mph in 6.96 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. That makes it the 4,563rd quickest of the 14,946 cars in the set.
What is the Audi A1 citycarver 1.5 35 TFSI S tronic 150 quarter mile time?
15.37 s at 91.5 mph. It reaches the eighth mile in 10.01 s and clears the first 60 ft in 2.48 s. These are theoretical times from a physics simulation, not measured runs.
How much power does the Audi A1 citycarver 1.5 35 TFSI S tronic 150 have?
148 bhp and 1,205 kg, which is 122 bhp per tonne. It is front-drive, turbocharged, with 7 gears and a quoted top speed of 222 km/h. These are theoretical times from a physics simulation, not measured runs.
What cars are comparable to the Audi A1 citycarver 1.5 35 TFSI S tronic 150?
Closest here on pace: Alfa Romeo Giulietta 1.4 TB MultiAir 170 (2016) (6.93 s), SEAT Leon 180 TSI 180 (7.01 s), Alfa Romeo Giulietta 2.0 JTDm 175 (7.02 s). Each one can be raced against the Audi A1 citycarver 1.5 35 TFSI S tronic 150 in the panel at the top of this page. These are theoretical times from a physics simulation, not measured runs.
Are these real measured times?
No. Every figure on this page is produced by a physics simulation, not by a stopwatch at a drag strip. The Audi A1 citycarver 1.5 35 TFSI S tronic 150 is modelled from its published kerb mass, rated power, drivetrain and gearing, then trimmed until it reproduces 2 of its 2 published acceleration figures. Conditions are the same for every car in the set: dry asphalt, 20 °C, sea level, 1 ft rollout.
Figures regenerated 2026-10-12. Every number on this page is computed by the simulator at build time, so the page and the app can never disagree.