← My Auto Racer All cars Peugeot 0-60 Comparisons Answers

Peugeot 5008 2.0 BlueHDI 180

The Peugeot 5008 2.0 BlueHDI 180 reaches 60 mph in 8.18 s (100 km/h in 8.72 s) and covers a standing quarter mile in 16.38 s, tripping the lights at 84.3 mph. It clears the first 60 ft in 2.57 s and the eighth mile in 10.56 s.

Simulated, not measured — computed from published kerb mass, rated power, gearing and drivetrain, then fitted to this car’s own published acceleration figures. Dry asphalt, 20 °C, sea level, 1 ft rollout.

Peugeot 5008 2.0 BlueHDI 180 Lexus RX 300 V6 204

Pick who it runs against, then watch it happen — and change the surface, the weather or the distance and run it again.

Down the strip

Standing start Peugeot 5008 2.0 BlueHDI 180
0–60 mph8.18 s
0–100 km/h8.72 s
0–100 mph—
60 ft2.57 s
1/8 mile10.56 s
1/4 mile16.38 s
Trap speed84.3 mph

About the 5008 2.0 BlueHDI 180

The 2016 Peugeot 5008 2.0 BlueHDI 180 is a front-drive turbodiesel SUV of 1,633 kg with 177 bhp, which works out at 108 bhp per tonne. Front drive caps what it can put down off the line — 60 ft takes 2.57 s — so most of what it has to give arrives once it is already moving. Against the 14,946 cars in the set it is the 6,855th quickest to 60 mph, and the 70th quickest of the 456 Peugeots here. Its 84.3 mph trap speed sits about where its 0-60 puts it, so it launches and pulls in roughly equal measure. The simulation is trimmed to 2 of 2 published acceleration figures for this car.

On paper

Specification Peugeot 5008 2.0 BlueHDI 180
Year2016
Power177 hp (132 kW)
Kerb mass1,633 kg
Power to weight108 bhp/t
DrivetrainFront drive
Gears6
EngineTurbodiesel
Top speed129 mph (208 km/h), quoted

Similar cars

CarYear 0–601/4 mileTrapPower
Lexus RX 300 V6 20420048.15 s16.36 s86.8 mph201 bhp
Mercedes-Benz GLB 200 16320208.21 s16.38 s85.3 mph161 bhp
Land Rover Range Rover Sport 3.6 TDV8 27220058.23 s16.36 s83.6 mph268 bhp

Picked for a fair race, not just a matching 0-60: pace, power-to-weight and body shape all count, and at most one is from the same maker.

Where these times sit

0-60 under 10 seconds10,136 cars0-100 km/h under 10 seconds9,062 carsSlower in the wetevery car, re-runThe cost of altitudeevery car, re-runThe cost of a passengerevery car, re-run
Peugeot 0-60 timesevery modelFastest SUVs2,049 carsFastest cars of the 2010s4,541 cars
Put this race on your own page

Free to use anywhere, no attribution required beyond the credit line included above. How to embed →

Questions

What is the Peugeot 5008 2.0 BlueHDI 180 0-60 time?
The Peugeot 5008 2.0 BlueHDI 180 reaches 60 mph in 8.18 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. That makes it the 6,855th quickest of the 14,946 cars in the set.
What is the Peugeot 5008 2.0 BlueHDI 180 quarter mile time?
16.38 s at 84.3 mph. It reaches the eighth mile in 10.56 s and clears the first 60 ft in 2.57 s. These are theoretical times from a physics simulation, not measured runs.
How much power does the Peugeot 5008 2.0 BlueHDI 180 have?
177 bhp and 1,633 kg, which is 108 bhp per tonne. It is front-drive, turbodiesel, with 6 gears and a quoted top speed of 208 km/h. These are theoretical times from a physics simulation, not measured runs.
What cars are comparable to the Peugeot 5008 2.0 BlueHDI 180?
Closest here on pace: Lexus RX 300 V6 204 (8.15 s), Mercedes-Benz GLB 200 163 (8.21 s), Land Rover Range Rover Sport 3.6 TDV8 272 (8.23 s). Each one can be raced against the Peugeot 5008 2.0 BlueHDI 180 in the panel at the top of this page. These are theoretical times from a physics simulation, not measured runs.
Are these real measured times?
No. Every figure on this page is produced by a physics simulation, not by a stopwatch at a drag strip. The Peugeot 5008 2.0 BlueHDI 180 is modelled from its published kerb mass, rated power, drivetrain and gearing, then trimmed until it reproduces 2 of its 2 published acceleration figures. Conditions are the same for every car in the set: dry asphalt, 20 °C, sea level, 1 ft rollout.

Figures regenerated 2026-10-12. Every number on this page is computed by the simulator at build time, so the page and the app can never disagree.