Over a standing quarter mile on dry asphalt the BMW 118d (F20) is the quicker car,
covering it in 16.24 s at
86.1 mph against the BMW 1 Series (F20) 116d 116’s
16.86 s — a margin of
0.62 s. To 60 mph the BMW 118d (F20) takes
8.04 s and the BMW 1 Series (F20) 116d 116
8.86 s.
Simulated, not measured — computed from each car’s published kerb mass,
rated power and drivetrain, then fitted to its own published acceleration figures.
Dry asphalt, 20 °C, sea level, 1 ft rollout.
BMW 118d (F20)BMW 1 Series (F20) 116d 116
Watch the run in full — then change the surface, the weather
or the distance and run it again.
Down the strip
Standing start
BMW 118d (F20)
BMW 1 Series (F20) 116d 116
0–60 mph
8.04 s
8.86 s
0–100 mph
—
—
60 ft
2.46 s
2.54 s
1/8 mile
10.46 s
10.84 s
1/4 mile
16.24 s
16.86 s
Trap speed
86.1 mph
81.3 mph
Each car is trimmed to its own published figures —
2/2 for the BMW 118d (F20),
2/2 for the BMW 1 Series (F20) 116d 116 —
so a heavier car can still be the quicker one if that is what it tests.
Is the BMW 118d (F20) or the BMW 1 Series (F20) 116d 116 faster?
The BMW 118d (F20). Over a standing quarter mile it runs 16.24 s to the BMW 1 Series (F20) 116d 116's 16.86 s, a margin of 0.62 s, and it reaches 60 mph in 8.04 s against 8.86 s. These are theoretical times from a physics simulation, not measured runs.
What is the BMW 118d (F20) 0-60 time?
The BMW 118d (F20) reaches 60 mph in 8.04 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. It covers the standing quarter mile in 16.24 s at 86.1 mph.
What is the BMW 1 Series (F20) 116d 116 0-60 time?
The BMW 1 Series (F20) 116d 116 reaches 60 mph in 8.86 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. It covers the standing quarter mile in 16.86 s at 81.3 mph.
What trap speed does each car run?
The BMW 118d (F20) trips the lights at 86.1 mph and the BMW 1 Series (F20) 116d 116 at 81.3 mph at the end of the quarter mile. These are theoretical times from a physics simulation, not measured runs.
Are these real measured times?
No. Every time on this page is produced by a physics simulation, not by a stopwatch at a drag strip. Each car is modelled from its published kerb mass, rated power, drivetrain and gearing, then trimmed until it matches its own published acceleration figures — 2 of 2 for the BMW 118d (F20) and 2 of 2 for the BMW 1 Series (F20) 116d 116. Conditions are identical for both cars: dry asphalt, 20 °C, sea level, 1 ft rollout.
Figures regenerated 2026-10-12. Every number on this page is computed by the simulator at build time, so the page and the app can never disagree.