← My Auto Racer All cars Comparisons Answers 0-60 by make Fastest lists

Nissan Juke 1.0 DiG-T 117 (F16) vs Hyundai Bayon 1.0 TGD-i 100

Over a standing quarter mile on dry asphalt the Nissan Juke 1.0 DiG-T 117 (F16) is the quicker car, covering it in 17.13 s at 80.8 mph against the Hyundai Bayon 1.0 TGD-i 100’s 17.25 s — a margin of 0.12 s. To 60 mph the Nissan Juke 1.0 DiG-T 117 (F16) takes 9.47 s and the Hyundai Bayon 1.0 TGD-i 100 9.73 s.

Simulated, not measured — computed from each car’s published kerb mass, rated power and drivetrain, then fitted to its own published acceleration figures. Dry asphalt, 20 °C, sea level, 1 ft rollout.

Nissan Juke 1.0 DiG-T 117 (F16) Hyundai Bayon 1.0 TGD-i 100

Watch the run in full — then change the surface, the weather or the distance and run it again.

Down the strip

Standing startNissan Juke 1.0 DiG-T 117 (F16)Hyundai Bayon 1.0 TGD-i 100
0–60 mph9.47 s9.73 s
0–100 mph——
60 ft2.58 s2.58 s
1/8 mile11.01 s11.08 s
1/4 mile17.13 s17.25 s
Trap speed80.8 mph79.8 mph

Each car is trimmed to its own published figures — 2/2 for the Nissan Juke 1.0 DiG-T 117 (F16), 2/2 for the Hyundai Bayon 1.0 TGD-i 100 — so a heavier car can still be the quicker one if that is what it tests.

On paper

SpecificationNissan Juke 1.0 DiG-T 117 (F16)Hyundai Bayon 1.0 TGD-i 100
Year20192022
Power115 bhp99 bhp
Kerb mass1,182 kg1,095 kg
Power to weight98 bhp/t91 bhp/t
DrivetrainFront driveFront drive
EngineTurbochargedTurbocharged

Where these times sit

0-60 under 10 seconds10,147 carsSlower in the wetevery car, re-runThe cost of altitudeevery car, re-runThe cost of a passengerevery car, re-run
Nissan 0-60 timesevery modelHyundai 0-60 timesevery modelFastest SUVs2,062 cars

Try another matchup

Put this race on your own page

Free to use anywhere, no attribution required beyond the credit line included above. How to embed →

Or open the full simulator →

Questions

Is the Nissan Juke 1.0 DiG-T 117 (F16) or the Hyundai Bayon 1.0 TGD-i 100 faster?
The Nissan Juke 1.0 DiG-T 117 (F16). Over a standing quarter mile it runs 17.13 s to the Hyundai Bayon 1.0 TGD-i 100's 17.25 s, a margin of 0.12 s, and it reaches 60 mph in 9.47 s against 9.73 s. These are theoretical times from a physics simulation, not measured runs.
What is the Nissan Juke 1.0 DiG-T 117 (F16) 0-60 time?
The Nissan Juke 1.0 DiG-T 117 (F16) reaches 60 mph in 9.47 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. It covers the standing quarter mile in 17.13 s at 80.8 mph.
What is the Hyundai Bayon 1.0 TGD-i 100 0-60 time?
The Hyundai Bayon 1.0 TGD-i 100 reaches 60 mph in 9.73 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. It covers the standing quarter mile in 17.25 s at 79.8 mph.
What trap speed does each car run?
The Nissan Juke 1.0 DiG-T 117 (F16) trips the lights at 80.8 mph and the Hyundai Bayon 1.0 TGD-i 100 at 79.8 mph at the end of the quarter mile. These are theoretical times from a physics simulation, not measured runs.
Are these real measured times?
No. Every time on this page is produced by a physics simulation, not by a stopwatch at a drag strip. Each car is modelled from its published kerb mass, rated power, drivetrain and gearing, then trimmed until it matches its own published acceleration figures — 2 of 2 for the Nissan Juke 1.0 DiG-T 117 (F16) and 2 of 2 for the Hyundai Bayon 1.0 TGD-i 100. Conditions are identical for both cars: dry asphalt, 20 °C, sea level, 1 ft rollout.

Figures regenerated 2026-10-12. Every number on this page is computed by the simulator at build time, so the page and the app can never disagree.