SEAT Leon Cupra 290 vs Cupra Formentor 1.5 TSI 150
Over a standing quarter mile on dry asphalt the SEAT Leon Cupra 290 is the quicker car,
covering it in 13.55 s at
105.3 mph against the Cupra Formentor 1.5 TSI 150’s
16.32 s — a margin of
2.77 s. To 60 mph the SEAT Leon Cupra 290 takes
5.19 s and the Cupra Formentor 1.5 TSI 150
8.04 s.
Simulated, not measured — computed from each car’s published kerb mass,
rated power and drivetrain, then fitted to its own published acceleration figures.
Dry asphalt, 20 °C, sea level, 1 ft rollout.
SEAT Leon Cupra 290Cupra Formentor 1.5 TSI 150
Watch the run in full — then change the surface, the weather
or the distance and run it again.
Down the strip
Standing start
SEAT Leon Cupra 290
Cupra Formentor 1.5 TSI 150
0–60 mph
5.19 s
8.04 s
0–100 mph
11.93 s
—
60 ft
2.26 s
2.53 s
1/8 mile
8.88 s
10.57 s
1/4 mile
13.55 s
16.32 s
Trap speed
105.3 mph
85.3 mph
Each car is trimmed to its own published figures —
9/10 for the SEAT Leon Cupra 290,
2/2 for the Cupra Formentor 1.5 TSI 150 —
so a heavier car can still be the quicker one if that is what it tests.
Is the SEAT Leon Cupra 290 or the Cupra Formentor 1.5 TSI 150 faster?
The SEAT Leon Cupra 290. Over a standing quarter mile it runs 13.55 s to the Cupra Formentor 1.5 TSI 150's 16.32 s, a margin of 2.77 s, and it reaches 60 mph in 5.19 s against 8.04 s. These are theoretical times from a physics simulation, not measured runs.
What is the SEAT Leon Cupra 290 0-60 time?
The SEAT Leon Cupra 290 reaches 60 mph in 5.19 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. It covers the standing quarter mile in 13.55 s at 105.3 mph.
What is the Cupra Formentor 1.5 TSI 150 0-60 time?
The Cupra Formentor 1.5 TSI 150 reaches 60 mph in 8.04 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. It covers the standing quarter mile in 16.32 s at 85.3 mph.
What trap speed does each car run?
The SEAT Leon Cupra 290 trips the lights at 105.3 mph and the Cupra Formentor 1.5 TSI 150 at 85.3 mph at the end of the quarter mile. These are theoretical times from a physics simulation, not measured runs.
Are these real measured times?
No. Every time on this page is produced by a physics simulation, not by a stopwatch at a drag strip. Each car is modelled from its published kerb mass, rated power, drivetrain and gearing, then trimmed until it matches its own published acceleration figures — 9 of 10 for the SEAT Leon Cupra 290 and 2 of 2 for the Cupra Formentor 1.5 TSI 150. Conditions are identical for both cars: dry asphalt, 20 °C, sea level, 1 ft rollout.
Figures regenerated 2026-10-12. Every number on this page is computed by the simulator at build time, so the page and the app can never disagree.