← My Auto Racer All cars Cupra 0-60 Comparisons Answers

Cupra Ateca 2.0 TSI 300

The Cupra Ateca 2.0 TSI 300 reaches 60 mph in 4.63 s (100 km/h in 4.91 s) and covers a standing quarter mile in 13.28 s, tripping the lights at 101.8 mph. It clears the first 60 ft in 1.94 s and the eighth mile in 8.46 s, reaching 100 mph in 12.60 s.

Simulated, not measured — computed from published kerb mass, rated power, gearing and drivetrain, then fitted to this car’s own published acceleration figures. Dry asphalt, 20 °C, sea level, 1 ft rollout.

Cupra Ateca 2.0 TSI 300 Mercedes-AMG GLE 53 V167

Pick who it runs against, then watch it happen — and change the surface, the weather or the distance and run it again.

Down the strip

Standing start Cupra Ateca 2.0 TSI 300
0–60 mph4.63 s
0–100 km/h4.91 s
0–100 mph12.60 s
60 ft1.94 s
1/8 mile8.46 s
1/4 mile13.28 s
Trap speed101.8 mph

About the Ateca 2.0 TSI 300

The 2018 Cupra Ateca 2.0 TSI 300 is an all-wheel-drive turbocharged SUV of 1,615 kg with 296 bhp, which works out at 184 bhp per tonne. All-wheel drive is worth most in the first car length: it covers 60 ft in 1.94 s, which is where a four-wheel-drive car takes its margin out of a rear-drive one with the same power. Against the 14,946 cars in the set it is the 1,769th quickest to 60 mph, inside the fastest quarter, and the 2nd quickest of the 9 Cupras here. Its 101.8 mph trap speed sits about where its 0-60 puts it, so it launches and pulls in roughly equal measure. The simulation is trimmed to 2 of 2 published acceleration figures for this car.

On paper

Specification Cupra Ateca 2.0 TSI 300
Year2018
Power296 hp (221 kW)
Kerb mass1,615 kg
Power to weight184 bhp/t
DrivetrainAll-wheel drive
Gears7
EngineTurbocharged
Top speed153 mph (246 km/h), quoted

Similar cars

CarYear 0–601/4 mileTrapPower
Mercedes-AMG GLE 53 V16720194.62 s13.22 s103.2 mph429 bhp
VW Tiguan R20204.57 s13.19 s102.7 mph315 bhp
Land Rover Defender 110 5.0 V8 P525 52520204.63 s13.42 s99.6 mph518 bhp

Picked for a fair race, not just a matching 0-60: pace, power-to-weight and body shape all count, and at most one is from the same maker.

Head to head

SEAT Ateca 1.4 TSI 150 vs Cupra Ateca 2.0 TSI 300Full comparisonVolkswagen Tiguan 2.0 TDI 150 (Mk2) vs Cupra Ateca 2.0 TSI 300Full comparisonSkoda Karoq 1.5 TSI 150 vs Cupra Ateca 2.0 TSI 300Full comparison

Where these times sit

0-60 under 5 seconds2,158 cars0-100 km/h under 5 seconds1,845 carsQuarter mile under 14 seconds2,644 cars0-100 under 16 seconds2,740 carsTraps over 100 mph2,737 carsSlower in the wetevery car, re-runThe cost of altitudeevery car, re-runThe cost of a passengerevery car, re-run
Cupra 0-60 timesevery modelFastest SUVs2,049 carsFastest cars of the 2010s4,541 cars
Put this race on your own page

Free to use anywhere, no attribution required beyond the credit line included above. How to embed →

Questions

What is the Cupra Ateca 2.0 TSI 300 0-60 time?
The Cupra Ateca 2.0 TSI 300 reaches 60 mph in 4.63 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. That makes it the 1,769th quickest of the 14,946 cars in the set.
What is the Cupra Ateca 2.0 TSI 300 quarter mile time?
13.28 s at 101.8 mph. It reaches the eighth mile in 8.46 s and clears the first 60 ft in 1.94 s. These are theoretical times from a physics simulation, not measured runs.
How much power does the Cupra Ateca 2.0 TSI 300 have?
296 bhp and 1,615 kg, which is 184 bhp per tonne. It is all-wheel-drive, turbocharged, with 7 gears and a quoted top speed of 246 km/h. These are theoretical times from a physics simulation, not measured runs.
What cars are comparable to the Cupra Ateca 2.0 TSI 300?
Closest here on pace: Mercedes-AMG GLE 53 V167 (4.62 s), VW Tiguan R (4.57 s), Land Rover Defender 110 5.0 V8 P525 525 (4.63 s). Each one can be raced against the Cupra Ateca 2.0 TSI 300 in the panel at the top of this page. These are theoretical times from a physics simulation, not measured runs.
Are these real measured times?
No. Every figure on this page is produced by a physics simulation, not by a stopwatch at a drag strip. The Cupra Ateca 2.0 TSI 300 is modelled from its published kerb mass, rated power, drivetrain and gearing, then trimmed until it reproduces 2 of its 2 published acceleration figures. Conditions are the same for every car in the set: dry asphalt, 20 °C, sea level, 1 ft rollout.

Figures regenerated 2026-10-12. Every number on this page is computed by the simulator at build time, so the page and the app can never disagree.