← My Auto Racer All cars Ferrari 0-60 Comparisons
The Ferrari Monza SP1 reaches 60 mph in 2.53 s and covers a standing quarter mile in 10.00 s, tripping the lights at 143.6 mph. It clears the first 60 ft in 1.65 s and the eighth mile in 6.55 s, reaching 100 mph in 5.20 s.
Simulated, not measured — computed from published kerb mass, rated power, gearing and drivetrain, then fitted to this car’s own published acceleration figures. Dry asphalt, 20 °C, sea level, 1 ft rollout.
Pick who it runs against, then watch it happen — and change the surface, the weather or the distance and run it again.
| Standing start | Ferrari Monza SP1 |
|---|---|
| 0–60 mph | 2.53 s |
| 0–100 mph | 5.20 s |
| 60 ft | 1.65 s |
| 1/8 mile | 6.55 s |
| 1/4 mile | 10.00 s |
| Trap speed | 143.6 mph |
The 2018 Ferrari Monza SP1 is a rear-drive naturally aspirated supercar of 1,500 kg with 799 bhp, which works out at 533 bhp per tonne. Rear drive and 533 bhp per tonne make the launch the hard part of the run: 60 ft takes 1.65 s. Against the 2,929 cars in the set it is the 74th quickest to 60 mph, inside the fastest five per cent, and the 7th quickest of the 81 Ferraris here. Its 143.6 mph trap speed sits about where its 0-60 puts it, so it launches and pulls in roughly equal measure. The simulation is trimmed to 5 of 6 published acceleration figures for this car.
| Specification | Ferrari Monza SP1 |
|---|---|
| Year | 2018 |
| Power | 799 bhp |
| Kerb mass | 1,500 kg |
| Power to weight | 533 bhp/t |
| Drivetrain | Rear drive |
| Gears | 7 |
| Engine | Naturally aspirated |
| Top speed | 300 km/h |
| Car | Year | 0–60 | 1/4 mile | Trap | Power |
|---|---|---|---|---|---|
| Mclaren 750S | 2023 | 2.51 s | 9.87 s | 144.1 mph | 740 bhp |
| Mclaren 765LT Spider | 2021 | 2.51 s | 9.83 s | 145.2 mph | 755 bhp |
| Brabus Bodo | 2026 | 2.50 s | 10.21 s | 138.8 mph | 986 bhp |
Picked for a fair race, not just a matching 0-60: pace, power-to-weight and body shape all count, and at most one is from the same maker.
Figures regenerated 2026-09-01. Every number on this page is computed by the simulator at build time, so the page and the app can never disagree.