← My Auto Racer All cars Jeep 0-60 Comparisons Answers

Jeep Renegade 1.4 MultiAir 140

The Jeep Renegade 1.4 MultiAir 140 reaches 60 mph in 9.92 s (100 km/h in 10.58 s) and covers a standing quarter mile in 17.44 s, tripping the lights at 78.3 mph. It clears the first 60 ft in 2.65 s and the eighth mile in 11.15 s.

Simulated, not measured — computed from published kerb mass, rated power, gearing and drivetrain, then fitted to this car’s own published acceleration figures. Dry asphalt, 20 °C, sea level, 1 ft rollout.

Jeep Renegade 1.4 MultiAir 140 Mazda CX-5 2.0 Skyactiv-G 155

Pick who it runs against, then watch it happen — and change the surface, the weather or the distance and run it again.

Down the strip

Standing start Jeep Renegade 1.4 MultiAir 140
0–60 mph9.92 s
0–100 km/h10.58 s
0–100 mph—
60 ft2.65 s
1/8 mile11.15 s
1/4 mile17.44 s
Trap speed78.3 mph

About the Renegade 1.4 MultiAir 140

The 2014 Jeep Renegade 1.4 MultiAir 140 is a front-drive turbocharged SUV of 1,380 kg with 138 bhp, which works out at 100 bhp per tonne. Front drive caps what it can put down off the line — 60 ft takes 2.65 s — so most of what it has to give arrives once it is already moving. Against the 14,946 cars in the set it is the 9,977th quickest to 60 mph, and the 51st quickest of the 68 Jeeps here. It leaves better than it pulls: 78.3 mph at the lights is only the 10,962nd highest here, so its 0-60 flatters what it does further out. The simulation is trimmed to 2 of 2 published acceleration figures for this car.

On paper

Specification Jeep Renegade 1.4 MultiAir 140
Year2014
Power138 hp (103 kW)
Kerb mass1,380 kg
Power to weight100 bhp/t
DrivetrainFront drive
Gears6
EngineTurbocharged
Top speed112 mph (180 km/h), quoted

Similar cars

CarYear 0–601/4 mileTrapPower
Mazda CX-5 2.0 Skyactiv-G 15520169.92 s17.47 s79.3 mph153 bhp
Kia Sportage 2.0 GDI 16620139.92 s17.47 s78.6 mph164 bhp
Nissan Prairie 2.4 13319899.93 s17.55 s80.3 mph131 bhp

Picked for a fair race, not just a matching 0-60: pace, power-to-weight and body shape all count, and at most one is from the same maker.

Where these times sit

0-60 under 10 seconds10,136 carsSlower in the wetevery car, re-runThe cost of altitudeevery car, re-runThe cost of a passengerevery car, re-run
Jeep 0-60 timesevery modelFastest SUVs2,049 carsFastest cars of the 2010s4,541 cars
Put this race on your own page

Free to use anywhere, no attribution required beyond the credit line included above. How to embed →

Questions

What is the Jeep Renegade 1.4 MultiAir 140 0-60 time?
The Jeep Renegade 1.4 MultiAir 140 reaches 60 mph in 9.92 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. That makes it the 9,977th quickest of the 14,946 cars in the set.
What is the Jeep Renegade 1.4 MultiAir 140 quarter mile time?
17.44 s at 78.3 mph. It reaches the eighth mile in 11.15 s and clears the first 60 ft in 2.65 s. These are theoretical times from a physics simulation, not measured runs.
How much power does the Jeep Renegade 1.4 MultiAir 140 have?
138 bhp and 1,380 kg, which is 100 bhp per tonne. It is front-drive, turbocharged, with 6 gears and a quoted top speed of 180 km/h. These are theoretical times from a physics simulation, not measured runs.
What cars are comparable to the Jeep Renegade 1.4 MultiAir 140?
Closest here on pace: Mazda CX-5 2.0 Skyactiv-G 155 (9.92 s), Kia Sportage 2.0 GDI 166 (9.92 s), Nissan Prairie 2.4 133 (9.93 s). Each one can be raced against the Jeep Renegade 1.4 MultiAir 140 in the panel at the top of this page. These are theoretical times from a physics simulation, not measured runs.
Are these real measured times?
No. Every figure on this page is produced by a physics simulation, not by a stopwatch at a drag strip. The Jeep Renegade 1.4 MultiAir 140 is modelled from its published kerb mass, rated power, drivetrain and gearing, then trimmed until it reproduces 2 of its 2 published acceleration figures. Conditions are the same for every car in the set: dry asphalt, 20 °C, sea level, 1 ft rollout.

Figures regenerated 2026-10-12. Every number on this page is computed by the simulator at build time, so the page and the app can never disagree.