← My Auto Racer All cars Peugeot 0-60 Comparisons Answers

Peugeot 208 5dr 1.6 BlueHDI 120

The Peugeot 208 5dr 1.6 BlueHDI 120 reaches 60 mph in 8.57 s (100 km/h in 9.04 s) and covers a standing quarter mile in 16.43 s, tripping the lights at 84.2 mph. It clears the first 60 ft in 2.47 s and the eighth mile in 10.57 s.

Simulated, not measured — computed from published kerb mass, rated power, gearing and drivetrain, then fitted to this car’s own published acceleration figures. Dry asphalt, 20 °C, sea level, 1 ft rollout.

Peugeot 208 5dr 1.6 BlueHDI 120 Citroen C2 1.6 HDiF 110

Pick who it runs against, then watch it happen — and change the surface, the weather or the distance and run it again.

Down the strip

Standing start Peugeot 208 5dr 1.6 BlueHDI 120
0–60 mph8.57 s
0–100 km/h9.04 s
0–100 mph—
60 ft2.47 s
1/8 mile10.57 s
1/4 mile16.43 s
Trap speed84.2 mph

About the 208 5dr 1.6 BlueHDI 120

The 2015 Peugeot 208 5dr 1.6 BlueHDI 120 is a front-drive turbodiesel car of 1,190 kg with 118 bhp, which works out at 99 bhp per tonne. Front drive caps what it can put down off the line — 60 ft takes 2.47 s — so most of what it has to give arrives once it is already moving. Against the 14,946 cars in the set it is the 7,617th quickest to 60 mph, and the 92nd quickest of the 456 Peugeots here. Its 84.2 mph trap speed sits about where its 0-60 puts it, so it launches and pulls in roughly equal measure. The simulation is trimmed to 2 of 2 published acceleration figures for this car.

On paper

Specification Peugeot 208 5dr 1.6 BlueHDI 120
Year2015
Power118 hp (88 kW)
Kerb mass1,190 kg
Power to weight99 bhp/t
DrivetrainFront drive
Gears6
EngineTurbodiesel
Top speed118 mph (190 km/h), quoted

Similar cars

CarYear 0–601/4 mileTrapPower
Citroen C2 1.6 HDiF 11020088.53 s16.49 s83.7 mph109 bhp
Alfa Romeo 156 2.4 JTD 14019978.54 s16.42 s84.1 mph138 bhp
Citroen C2 VTS 1.6 HDi 11020038.53 s16.49 s83.7 mph109 bhp

Picked for a fair race, not just a matching 0-60: pace, power-to-weight and body shape all count, and at most one is from the same maker.

Where these times sit

0-60 under 10 seconds10,136 cars0-100 km/h under 10 seconds9,062 carsSlower in the wetevery car, re-runThe cost of altitudeevery car, re-runThe cost of a passengerevery car, re-run
Peugeot 0-60 timesevery modelFastest small cars1,681 carsFastest cars of the 2010s4,541 cars
Put this race on your own page

Free to use anywhere, no attribution required beyond the credit line included above. How to embed →

Questions

What is the Peugeot 208 5dr 1.6 BlueHDI 120 0-60 time?
The Peugeot 208 5dr 1.6 BlueHDI 120 reaches 60 mph in 8.57 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. That makes it the 7,617th quickest of the 14,946 cars in the set.
What is the Peugeot 208 5dr 1.6 BlueHDI 120 quarter mile time?
16.43 s at 84.2 mph. It reaches the eighth mile in 10.57 s and clears the first 60 ft in 2.47 s. These are theoretical times from a physics simulation, not measured runs.
How much power does the Peugeot 208 5dr 1.6 BlueHDI 120 have?
118 bhp and 1,190 kg, which is 99 bhp per tonne. It is front-drive, turbodiesel, with 6 gears and a quoted top speed of 190 km/h. These are theoretical times from a physics simulation, not measured runs.
What cars are comparable to the Peugeot 208 5dr 1.6 BlueHDI 120?
Closest here on pace: Citroen C2 1.6 HDiF 110 (8.53 s), Alfa Romeo 156 2.4 JTD 140 (8.54 s), Citroen C2 VTS 1.6 HDi 110 (8.53 s). Each one can be raced against the Peugeot 208 5dr 1.6 BlueHDI 120 in the panel at the top of this page. These are theoretical times from a physics simulation, not measured runs.
Are these real measured times?
No. Every figure on this page is produced by a physics simulation, not by a stopwatch at a drag strip. The Peugeot 208 5dr 1.6 BlueHDI 120 is modelled from its published kerb mass, rated power, drivetrain and gearing, then trimmed until it reproduces 2 of its 2 published acceleration figures. Conditions are the same for every car in the set: dry asphalt, 20 °C, sea level, 1 ft rollout.

Figures regenerated 2026-10-12. Every number on this page is computed by the simulator at build time, so the page and the app can never disagree.