← My Auto Racer All cars SEAT 0-60 Comparisons Answers

SEAT Altea Freetrack 1.4 TSI 125

The SEAT Altea Freetrack 1.4 TSI 125 reaches 60 mph in 9.92 s (100 km/h in 10.50 s) and covers a standing quarter mile in 17.31 s, tripping the lights at 79.4 mph. It clears the first 60 ft in 2.60 s and the eighth mile in 11.12 s.

Simulated, not measured — computed from published kerb mass, rated power, gearing and drivetrain, then fitted to this car’s own published acceleration figures. Dry asphalt, 20 °C, sea level, 1 ft rollout.

SEAT Altea Freetrack 1.4 TSI 125 Dacia Duster 1.2 TCe 125 (2017)

Pick who it runs against, then watch it happen — and change the surface, the weather or the distance and run it again.

Down the strip

Standing start SEAT Altea Freetrack 1.4 TSI 125
0–60 mph9.92 s
0–100 km/h10.50 s
0–100 mph—
60 ft2.60 s
1/8 mile11.12 s
1/4 mile17.31 s
Trap speed79.4 mph

About the Altea Freetrack 1.4 TSI 125

The 2009 SEAT Altea Freetrack 1.4 TSI 125 is a front-drive turbocharged SUV of 1,388 kg with 123 bhp, which works out at 89 bhp per tonne. Front drive caps what it can put down off the line — 60 ft takes 2.60 s — so most of what it has to give arrives once it is already moving. Against the 14,946 cars in the set it is the 9,983rd quickest to 60 mph, and the 74th quickest of the 192 SEATs here. Its 79.4 mph trap speed sits about where its 0-60 puts it, so it launches and pulls in roughly equal measure. The simulation is trimmed to 2 of 2 published acceleration figures for this car.

On paper

Specification SEAT Altea Freetrack 1.4 TSI 125
Year2009
Power123 hp (92 kW)
Kerb mass1,388 kg
Power to weight89 bhp/t
DrivetrainFront drive
Gears6
EngineTurbocharged
Top speed117 mph (188 km/h), quoted

Similar cars

CarYear 0–601/4 mileTrapPower
Dacia Duster 1.2 TCe 125 (2017)20179.95 s17.31 s77.8 mph123 bhp
Peugeot 3008 BlueHDi 130 (Mk2)20169.93 s17.33 s79.6 mph129 bhp
Jeep Compass 2.2 CRD 13620079.91 s17.38 s79.1 mph134 bhp

Picked for a fair race, not just a matching 0-60: pace, power-to-weight and body shape all count, and at most one is from the same maker.

Where these times sit

0-60 under 10 seconds10,136 carsSlower in the wetevery car, re-runThe cost of altitudeevery car, re-runThe cost of a passengerevery car, re-run
SEAT 0-60 timesevery modelFastest SUVs2,049 carsFastest cars of the 2000s5,138 cars
Put this race on your own page

Free to use anywhere, no attribution required beyond the credit line included above. How to embed →

Questions

What is the SEAT Altea Freetrack 1.4 TSI 125 0-60 time?
The SEAT Altea Freetrack 1.4 TSI 125 reaches 60 mph in 9.92 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. That makes it the 9,983rd quickest of the 14,946 cars in the set.
What is the SEAT Altea Freetrack 1.4 TSI 125 quarter mile time?
17.31 s at 79.4 mph. It reaches the eighth mile in 11.12 s and clears the first 60 ft in 2.60 s. These are theoretical times from a physics simulation, not measured runs.
How much power does the SEAT Altea Freetrack 1.4 TSI 125 have?
123 bhp and 1,388 kg, which is 89 bhp per tonne. It is front-drive, turbocharged, with 6 gears and a quoted top speed of 188 km/h. These are theoretical times from a physics simulation, not measured runs.
What cars are comparable to the SEAT Altea Freetrack 1.4 TSI 125?
Closest here on pace: Dacia Duster 1.2 TCe 125 (2017) (9.95 s), Peugeot 3008 BlueHDi 130 (Mk2) (9.93 s), Jeep Compass 2.2 CRD 136 (9.91 s). Each one can be raced against the SEAT Altea Freetrack 1.4 TSI 125 in the panel at the top of this page. These are theoretical times from a physics simulation, not measured runs.
Are these real measured times?
No. Every figure on this page is produced by a physics simulation, not by a stopwatch at a drag strip. The SEAT Altea Freetrack 1.4 TSI 125 is modelled from its published kerb mass, rated power, drivetrain and gearing, then trimmed until it reproduces 2 of its 2 published acceleration figures. Conditions are the same for every car in the set: dry asphalt, 20 °C, sea level, 1 ft rollout.

Figures regenerated 2026-10-12. Every number on this page is computed by the simulator at build time, so the page and the app can never disagree.