Over a standing quarter mile on dry asphalt the Audi R8 GT RWD Mk II is the quicker car,
covering it in 10.96 s at
130.9 mph against the Audi RS5 B10’s
11.51 s — a margin of
0.55 s. To 60 mph the Audi R8 GT RWD Mk II takes
3.11 s and the Audi RS5 B10
3.19 s.
Simulated, not measured — computed from each car’s published kerb mass,
rated power and drivetrain, then fitted to its own published acceleration figures.
Dry asphalt, 20 °C, sea level, 1 ft rollout.
Audi RS5 B10Audi R8 GT RWD Mk II
Watch the run in full — then change the surface, the weather
or the distance and run it again.
Down the strip
Standing start
Audi RS5 B10
Audi R8 GT RWD Mk II
0–60 mph
3.19 s
3.11 s
0–100 mph
7.84 s
6.53 s
60 ft
1.77 s
1.81 s
1/8 mile
7.40 s
7.16 s
1/4 mile
11.51 s
10.96 s
Trap speed
119.6 mph
130.9 mph
Each car is trimmed to its own published figures —
10/10 for the Audi RS5 B10,
9/11 for the Audi R8 GT RWD Mk II —
so a heavier car can still be the quicker one if that is what it tests.
Is the Audi RS5 B10 or the Audi R8 GT RWD Mk II faster?
The Audi R8 GT RWD Mk II. Over a standing quarter mile it runs 10.96 s to the Audi RS5 B10's 11.51 s, a margin of 0.55 s, and it reaches 60 mph in 3.11 s against 3.19 s. These are theoretical times from a physics simulation, not measured runs.
What is the Audi RS5 B10 0-60 time?
The Audi RS5 B10 reaches 60 mph in 3.19 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. It covers the standing quarter mile in 11.51 s at 119.6 mph.
What is the Audi R8 GT RWD Mk II 0-60 time?
The Audi R8 GT RWD Mk II reaches 60 mph in 3.11 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. It covers the standing quarter mile in 10.96 s at 130.9 mph.
What trap speed does each car run?
The Audi RS5 B10 trips the lights at 119.6 mph and the Audi R8 GT RWD Mk II at 130.9 mph at the end of the quarter mile. These are theoretical times from a physics simulation, not measured runs.
Are these real measured times?
No. Every time on this page is produced by a physics simulation, not by a stopwatch at a drag strip. Each car is modelled from its published kerb mass, rated power, drivetrain and gearing, then trimmed until it matches its own published acceleration figures — 10 of 10 for the Audi RS5 B10 and 9 of 11 for the Audi R8 GT RWD Mk II. Conditions are identical for both cars: dry asphalt, 20 °C, sea level, 1 ft rollout.
Figures regenerated 2026-10-12. Every number on this page is computed by the simulator at build time, so the page and the app can never disagree.