← My Auto Racer All cars Comparisons Answers 0-60 by make Fastest lists

Hyundai Tucson 1.6 CRDi 136 (Mk3) vs BYD Seal U DM-i Boost 18.3kWh

Over a standing quarter mile on dry asphalt the BYD Seal U DM-i Boost 18.3kWh is the quicker car, covering it in 16.34 s at 83.6 mph against the Hyundai Tucson 1.6 CRDi 136 (Mk3)’s 17.66 s — a margin of 1.32 s. To 60 mph the BYD Seal U DM-i Boost 18.3kWh takes 8.02 s and the Hyundai Tucson 1.6 CRDi 136 (Mk3) 10.36 s.

Simulated, not measured — computed from each car’s published kerb mass, rated power and drivetrain, then fitted to its own published acceleration figures. Dry asphalt, 20 °C, sea level, 1 ft rollout.

Hyundai Tucson 1.6 CRDi 136 (Mk3) BYD Seal U DM-i Boost 18.3kWh

Watch the run in full — then change the surface, the weather or the distance and run it again.

Down the strip

Standing startHyundai Tucson 1.6 CRDi 136 (Mk3)BYD Seal U DM-i Boost 18.3kWh
0–60 mph10.36 s8.02 s
0–100 mph——
60 ft2.65 s2.54 s
1/8 mile11.34 s10.47 s
1/4 mile17.66 s16.34 s
Trap speed77.9 mph83.6 mph

Each car is trimmed to its own published figures — 2/2 for the Hyundai Tucson 1.6 CRDi 136 (Mk3), 2/2 for the BYD Seal U DM-i Boost 18.3kWh — so a heavier car can still be the quicker one if that is what it tests.

On paper

SpecificationHyundai Tucson 1.6 CRDi 136 (Mk3)BYD Seal U DM-i Boost 18.3kWh
Year20182024
Power134 bhp215 bhp
Kerb mass1,573 kg1,940 kg
Power to weight85 bhp/t111 bhp/t
DrivetrainFront driveFront drive
EngineTurbodieselTurbocharged

Where these times sit

0-60 under 10 seconds10,147 cars0-100 km/h under 10 seconds9,071 carsSlower in the wetevery car, re-runThe cost of altitudeevery car, re-runThe cost of a passengerevery car, re-run
Hyundai 0-60 timesevery modelBYD 0-60 timesevery modelFastest SUVs2,062 cars

Try another matchup

Put this race on your own page

Free to use anywhere, no attribution required beyond the credit line included above. How to embed →

Or open the full simulator →

Questions

Is the Hyundai Tucson 1.6 CRDi 136 (Mk3) or the BYD Seal U DM-i Boost 18.3kWh faster?
The BYD Seal U DM-i Boost 18.3kWh. Over a standing quarter mile it runs 16.34 s to the Hyundai Tucson 1.6 CRDi 136 (Mk3)'s 17.66 s, a margin of 1.32 s, and it reaches 60 mph in 8.02 s against 10.36 s. These are theoretical times from a physics simulation, not measured runs.
What is the Hyundai Tucson 1.6 CRDi 136 (Mk3) 0-60 time?
The Hyundai Tucson 1.6 CRDi 136 (Mk3) reaches 60 mph in 10.36 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. It covers the standing quarter mile in 17.66 s at 77.9 mph.
What is the BYD Seal U DM-i Boost 18.3kWh 0-60 time?
The BYD Seal U DM-i Boost 18.3kWh reaches 60 mph in 8.02 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. It covers the standing quarter mile in 16.34 s at 83.6 mph.
What trap speed does each car run?
The Hyundai Tucson 1.6 CRDi 136 (Mk3) trips the lights at 77.9 mph and the BYD Seal U DM-i Boost 18.3kWh at 83.6 mph at the end of the quarter mile. These are theoretical times from a physics simulation, not measured runs.
Are these real measured times?
No. Every time on this page is produced by a physics simulation, not by a stopwatch at a drag strip. Each car is modelled from its published kerb mass, rated power, drivetrain and gearing, then trimmed until it matches its own published acceleration figures — 2 of 2 for the Hyundai Tucson 1.6 CRDi 136 (Mk3) and 2 of 2 for the BYD Seal U DM-i Boost 18.3kWh. Conditions are identical for both cars: dry asphalt, 20 °C, sea level, 1 ft rollout.

Figures regenerated 2026-10-12. Every number on this page is computed by the simulator at build time, so the page and the app can never disagree.