Peugeot 3008 BlueHDi 130 (Mk2) vs Opel Mokka 1.6 116
Over a standing quarter mile on dry asphalt the Peugeot 3008 BlueHDi 130 (Mk2) is the quicker car,
covering it in 17.33 s at
79.6 mph against the Opel Mokka 1.6 116’s
18.52 s — a margin of
1.18 s. To 60 mph the Peugeot 3008 BlueHDi 130 (Mk2) takes
9.93 s and the Opel Mokka 1.6 116
11.38 s.
Simulated, not measured — computed from each car’s published kerb mass,
rated power and drivetrain, then fitted to its own published acceleration figures.
Dry asphalt, 20 °C, sea level, 1 ft rollout.
Peugeot 3008 BlueHDi 130 (Mk2)Opel Mokka 1.6 116
Watch the run in full — then change the surface, the weather
or the distance and run it again.
Down the strip
Standing start
Peugeot 3008 BlueHDi 130 (Mk2)
Opel Mokka 1.6 116
0–60 mph
9.93 s
11.38 s
0–100 mph
—
—
60 ft
2.63 s
3.12 s
1/8 mile
11.16 s
12.02 s
1/4 mile
17.33 s
18.52 s
Trap speed
79.6 mph
75.9 mph
Each car is trimmed to its own published figures —
2/2 for the Peugeot 3008 BlueHDi 130 (Mk2),
2/2 for the Opel Mokka 1.6 116 —
so a heavier car can still be the quicker one if that is what it tests.
Is the Peugeot 3008 BlueHDi 130 (Mk2) or the Opel Mokka 1.6 116 faster?
The Peugeot 3008 BlueHDi 130 (Mk2). Over a standing quarter mile it runs 17.33 s to the Opel Mokka 1.6 116's 18.52 s, a margin of 1.18 s, and it reaches 60 mph in 9.93 s against 11.38 s. These are theoretical times from a physics simulation, not measured runs.
What is the Peugeot 3008 BlueHDi 130 (Mk2) 0-60 time?
The Peugeot 3008 BlueHDi 130 (Mk2) reaches 60 mph in 9.93 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. It covers the standing quarter mile in 17.33 s at 79.6 mph.
What is the Opel Mokka 1.6 116 0-60 time?
The Opel Mokka 1.6 116 reaches 60 mph in 11.38 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. It covers the standing quarter mile in 18.52 s at 75.9 mph.
What trap speed does each car run?
The Peugeot 3008 BlueHDi 130 (Mk2) trips the lights at 79.6 mph and the Opel Mokka 1.6 116 at 75.9 mph at the end of the quarter mile. These are theoretical times from a physics simulation, not measured runs.
Are these real measured times?
No. Every time on this page is produced by a physics simulation, not by a stopwatch at a drag strip. Each car is modelled from its published kerb mass, rated power, drivetrain and gearing, then trimmed until it matches its own published acceleration figures — 2 of 2 for the Peugeot 3008 BlueHDi 130 (Mk2) and 2 of 2 for the Opel Mokka 1.6 116. Conditions are identical for both cars: dry asphalt, 20 °C, sea level, 1 ft rollout.
Figures regenerated 2026-10-12. Every number on this page is computed by the simulator at build time, so the page and the app can never disagree.