The Citroen Berlingo BlueHDi 130 (Mk3) reaches 60 mph in 10.20 s (100 km/h in 10.79 s) and covers a standing quarter mile in 17.59 s, tripping the lights at 78.8 mph. It clears the first 60 ft in 2.68 s and the eighth mile in 11.34 s.
Simulated, not measured — computed from published kerb mass, rated power, gearing and
drivetrain, then fitted to this car’s own published acceleration figures.
Dry asphalt, 20 °C, sea level, 1 ft rollout.
Pick who it runs against, then watch it happen — and change the surface,
the weather or the distance and run it again.
Down the strip
Standing start
Citroen Berlingo BlueHDi 130 (Mk3)
0–60 mph
10.20 s
0–100 km/h
10.79 s
0–100 mph
—
60 ft
2.68 s
1/8 mile
11.34 s
1/4 mile
17.59 s
Trap speed
78.8 mph
About the Berlingo BlueHDi 130 (Mk3)
The 2018 Citroen Berlingo BlueHDi 130 (Mk3) is a front-drive turbodiesel MPV of 1,500 kg with 129 bhp, which works out at 86 bhp per tonne. Front drive caps what it can put down off the line — 60 ft takes 2.68 s — so most of what it has to give arrives once it is already moving. Against the 14,946 cars in the set it is the 10,497th quickest to 60 mph, and the 121st quickest of the 387 Citroens here. Its 78.8 mph trap speed sits about where its 0-60 puts it, so it launches and pulls in roughly equal measure. The simulation is trimmed to 2 of 2 published acceleration figures for this car.
Free to use anywhere, no attribution required beyond the credit line included above. How to embed →
Questions
What is the Citroen Berlingo BlueHDi 130 (Mk3) 0-60 time?
The Citroen Berlingo BlueHDi 130 (Mk3) reaches 60 mph in 10.20 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. That makes it the 10,497th quickest of the 14,946 cars in the set.
What is the Citroen Berlingo BlueHDi 130 (Mk3) quarter mile time?
17.59 s at 78.8 mph. It reaches the eighth mile in 11.34 s and clears the first 60 ft in 2.68 s. These are theoretical times from a physics simulation, not measured runs.
How much power does the Citroen Berlingo BlueHDi 130 (Mk3) have?
129 bhp and 1,500 kg, which is 86 bhp per tonne. It is front-drive, turbodiesel, with 6 gears and a quoted top speed of 180 km/h. These are theoretical times from a physics simulation, not measured runs.
What cars are comparable to the Citroen Berlingo BlueHDi 130 (Mk3)?
Closest here on pace: Vauxhall Meriva 1.4 Turbo 120 (10.25 s), Toyota Verso 2.0 D-4D 126 (2013) (10.27 s), Toyota Corolla Verso 2.0 D-4D 126 (10.27 s). Each one can be raced against the Citroen Berlingo BlueHDi 130 (Mk3) in the panel at the top of this page. These are theoretical times from a physics simulation, not measured runs.
Are these real measured times?
No. Every figure on this page is produced by a physics simulation, not by a stopwatch at a drag strip. The Citroen Berlingo BlueHDi 130 (Mk3) is modelled from its published kerb mass, rated power, drivetrain and gearing, then trimmed until it reproduces 2 of its 2 published acceleration figures. Conditions are the same for every car in the set: dry asphalt, 20 °C, sea level, 1 ft rollout.
Figures regenerated 2026-10-16. Every number on this page is computed by the simulator at build time, so the page and the app can never disagree.