← My Auto Racer All cars Hyundai 0-60 Comparisons Answers

Hyundai i20 Active 1.0 T-GDI 120

The Hyundai i20 Active 1.0 T-GDI 120 reaches 60 mph in 9.45 s (100 km/h in 10.01 s) and covers a standing quarter mile in 17.06 s, tripping the lights at 80.5 mph. It clears the first 60 ft in 2.53 s and the eighth mile in 10.94 s.

Simulated, not measured — computed from published kerb mass, rated power, gearing and drivetrain, then fitted to this car’s own published acceleration figures. Dry asphalt, 20 °C, sea level, 1 ft rollout.

Hyundai i20 Active 1.0 T-GDI 120 SEAT Leon 1.8 20V 125

Pick who it runs against, then watch it happen — and change the surface, the weather or the distance and run it again.

Down the strip

Standing start Hyundai i20 Active 1.0 T-GDI 120
0–60 mph9.45 s
0–100 km/h10.01 s
0–100 mph—
60 ft2.53 s
1/8 mile10.94 s
1/4 mile17.06 s
Trap speed80.5 mph

About the i20 Active 1.0 T-GDI 120

The 2018 Hyundai i20 Active 1.0 T-GDI 120 is a front-drive turbocharged car of 1,165 kg with 118 bhp, which works out at 101 bhp per tonne. Front drive caps what it can put down off the line — 60 ft takes 2.53 s — so most of what it has to give arrives once it is already moving. Against the 14,946 cars in the set it is the 9,179th quickest to 60 mph, and the 101st quickest of the 295 Hyundais here. Its 80.5 mph trap speed sits about where its 0-60 puts it, so it launches and pulls in roughly equal measure. The simulation is trimmed to 2 of 2 published acceleration figures for this car.

On paper

Specification Hyundai i20 Active 1.0 T-GDI 120
Year2018
Power118 hp (88 kW)
Kerb mass1,165 kg
Power to weight101 bhp/t
DrivetrainFront drive
Gears6
EngineTurbocharged
Top speed114 mph (183 km/h), quoted

Similar cars

CarYear 0–601/4 mileTrapPower
SEAT Leon 1.8 20V 12520009.39 s17.12 s83.0 mph123 bhp
Lancia Prisma 1.6 10119839.46 s17.26 s81.0 mph99 bhp
Toyota Auris 5dr 1.2 CVT 11620159.44 s17.21 s79.7 mph114 bhp

Picked for a fair race, not just a matching 0-60: pace, power-to-weight and body shape all count, and at most one is from the same maker.

Where these times sit

0-60 under 10 seconds10,136 carsSlower in the wetevery car, re-runThe cost of altitudeevery car, re-runThe cost of a passengerevery car, re-run
Hyundai 0-60 timesevery modelFastest hatchbacks4,513 carsFastest cars of the 2010s4,541 cars
Put this race on your own page

Free to use anywhere, no attribution required beyond the credit line included above. How to embed →

Questions

What is the Hyundai i20 Active 1.0 T-GDI 120 0-60 time?
The Hyundai i20 Active 1.0 T-GDI 120 reaches 60 mph in 9.45 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. That makes it the 9,179th quickest of the 14,946 cars in the set.
What is the Hyundai i20 Active 1.0 T-GDI 120 quarter mile time?
17.06 s at 80.5 mph. It reaches the eighth mile in 10.94 s and clears the first 60 ft in 2.53 s. These are theoretical times from a physics simulation, not measured runs.
How much power does the Hyundai i20 Active 1.0 T-GDI 120 have?
118 bhp and 1,165 kg, which is 101 bhp per tonne. It is front-drive, turbocharged, with 6 gears and a quoted top speed of 183 km/h. These are theoretical times from a physics simulation, not measured runs.
What cars are comparable to the Hyundai i20 Active 1.0 T-GDI 120?
Closest here on pace: SEAT Leon 1.8 20V 125 (9.39 s), Lancia Prisma 1.6 101 (9.46 s), Toyota Auris 5dr 1.2 CVT 116 (9.44 s). Each one can be raced against the Hyundai i20 Active 1.0 T-GDI 120 in the panel at the top of this page. These are theoretical times from a physics simulation, not measured runs.
Are these real measured times?
No. Every figure on this page is produced by a physics simulation, not by a stopwatch at a drag strip. The Hyundai i20 Active 1.0 T-GDI 120 is modelled from its published kerb mass, rated power, drivetrain and gearing, then trimmed until it reproduces 2 of its 2 published acceleration figures. Conditions are the same for every car in the set: dry asphalt, 20 °C, sea level, 1 ft rollout.

Figures regenerated 2026-10-12. Every number on this page is computed by the simulator at build time, so the page and the app can never disagree.