SEAT Leon Cupra 290 vs Kia Ceed 1.6 CRDi 136 (Mk3)
Over a standing quarter mile on dry asphalt the SEAT Leon Cupra 290 is the quicker car,
covering it in 13.55 s at
105.3 mph against the Kia Ceed 1.6 CRDi 136 (Mk3)’s
16.81 s — a margin of
3.26 s. To 60 mph the SEAT Leon Cupra 290 takes
5.19 s and the Kia Ceed 1.6 CRDi 136 (Mk3)
8.77 s.
Simulated, not measured — computed from each car’s published kerb mass,
rated power and drivetrain, then fitted to its own published acceleration figures.
Dry asphalt, 20 °C, sea level, 1 ft rollout.
SEAT Leon Cupra 290Kia Ceed 1.6 CRDi 136 (Mk3)
Watch the run in full — then change the surface, the weather
or the distance and run it again.
Down the strip
Standing start
SEAT Leon Cupra 290
Kia Ceed 1.6 CRDi 136 (Mk3)
0–60 mph
5.19 s
8.77 s
0–100 mph
11.93 s
—
60 ft
2.26 s
2.54 s
1/8 mile
8.88 s
10.82 s
1/4 mile
13.55 s
16.81 s
Trap speed
105.3 mph
81.7 mph
Each car is trimmed to its own published figures —
9/10 for the SEAT Leon Cupra 290,
2/2 for the Kia Ceed 1.6 CRDi 136 (Mk3) —
so a heavier car can still be the quicker one if that is what it tests.
Is the SEAT Leon Cupra 290 or the Kia Ceed 1.6 CRDi 136 (Mk3) faster?
The SEAT Leon Cupra 290. Over a standing quarter mile it runs 13.55 s to the Kia Ceed 1.6 CRDi 136 (Mk3)'s 16.81 s, a margin of 3.26 s, and it reaches 60 mph in 5.19 s against 8.77 s. These are theoretical times from a physics simulation, not measured runs.
What is the SEAT Leon Cupra 290 0-60 time?
The SEAT Leon Cupra 290 reaches 60 mph in 5.19 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. It covers the standing quarter mile in 13.55 s at 105.3 mph.
What is the Kia Ceed 1.6 CRDi 136 (Mk3) 0-60 time?
The Kia Ceed 1.6 CRDi 136 (Mk3) reaches 60 mph in 8.77 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. It covers the standing quarter mile in 16.81 s at 81.7 mph.
What trap speed does each car run?
The SEAT Leon Cupra 290 trips the lights at 105.3 mph and the Kia Ceed 1.6 CRDi 136 (Mk3) at 81.7 mph at the end of the quarter mile. These are theoretical times from a physics simulation, not measured runs.
Are these real measured times?
No. Every time on this page is produced by a physics simulation, not by a stopwatch at a drag strip. Each car is modelled from its published kerb mass, rated power, drivetrain and gearing, then trimmed until it matches its own published acceleration figures — 9 of 10 for the SEAT Leon Cupra 290 and 2 of 2 for the Kia Ceed 1.6 CRDi 136 (Mk3). Conditions are identical for both cars: dry asphalt, 20 °C, sea level, 1 ft rollout.
Figures regenerated 2026-10-12. Every number on this page is computed by the simulator at build time, so the page and the app can never disagree.