The Dodge Challenger SRT Hellcat reaches 60 mph in 3.80 s (100 km/h in 3.93 s) and covers a standing quarter mile in 11.62 s, tripping the lights at 128.9 mph. It clears the first 60 ft in 1.94 s and the eighth mile in 7.70 s, reaching 100 mph in 7.88 s.
Simulated, not measured — computed from published kerb mass, rated power, gearing and
drivetrain, then fitted to this car’s own published acceleration figures.
Dry asphalt, 20 °C, sea level, 1 ft rollout.
Dodge Challenger SRT HellcatFord Mustang Shelby GT500 Mk V
Pick who it runs against, then watch it happen — and change the surface,
the weather or the distance and run it again.
Down the strip
Standing start
Dodge Challenger SRT Hellcat
0–60 mph
3.80 s
0–100 km/h
3.93 s
0–100 mph
7.88 s
60 ft
1.94 s
1/8 mile
7.70 s
1/4 mile
11.62 s
Trap speed
128.9 mph
About the Challenger SRT Hellcat
The 2014 Dodge Challenger SRT Hellcat is a rear-drive turbocharged muscle car of 1,892 kg with 707 bhp, which works out at 374 bhp per tonne. Rear drive and 374 bhp per tonne make the launch the hard part of the run: 60 ft takes 1.94 s. Against the 14,946 cars in the set it is the 894th quickest to 60 mph, inside the fastest tenth, and the 12th quickest of the 60 Dodges here. Its 128.9 mph trap speed sits about where its 0-60 puts it, so it launches and pulls in roughly equal measure. The simulation is trimmed to 9 of 11 published acceleration figures for this car.
Free to use anywhere, no attribution required beyond the credit line included above. How to embed →
Questions
What is the Dodge Challenger SRT Hellcat 0-60 time?
The Dodge Challenger SRT Hellcat reaches 60 mph in 3.80 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. That makes it the 894th quickest of the 14,946 cars in the set.
What is the Dodge Challenger SRT Hellcat quarter mile time?
11.62 s at 128.9 mph. It reaches the eighth mile in 7.70 s and clears the first 60 ft in 1.94 s. These are theoretical times from a physics simulation, not measured runs.
How much power does the Dodge Challenger SRT Hellcat have?
707 bhp and 1,892 kg, which is 374 bhp per tonne. It is rear-drive, turbocharged, with 6 gears and a quoted top speed of 320 km/h. These are theoretical times from a physics simulation, not measured runs.
What cars are comparable to the Dodge Challenger SRT Hellcat?
Closest here on pace: Ford Mustang Shelby GT500 Mk V (3.85 s), Ford Mustang Shelby GT500 MK VI facelift (3.73 s), Chevrolet Camaro ZL1 Mk VI (3.53 s). Each one can be raced against the Dodge Challenger SRT Hellcat in the panel at the top of this page. These are theoretical times from a physics simulation, not measured runs.
Are these real measured times?
No. Every figure on this page is produced by a physics simulation, not by a stopwatch at a drag strip. The Dodge Challenger SRT Hellcat is modelled from its published kerb mass, rated power, drivetrain and gearing, then trimmed until it reproduces 9 of its 11 published acceleration figures. Conditions are the same for every car in the set: dry asphalt, 20 °C, sea level, 1 ft rollout.
Figures regenerated 2026-10-16. Every number on this page is computed by the simulator at build time, so the page and the app can never disagree.