Over a standing quarter mile on dry asphalt the Audi Q8 55 TSFI V6 340 is the quicker car,
covering it in 13.83 s at
99.0 mph against the Audi A6 4.2 quattro’s
14.26 s — a margin of
0.43 s. To 60 mph the Audi Q8 55 TSFI V6 340 takes
5.28 s and the Audi A6 4.2 quattro
5.72 s.
Simulated, not measured — computed from each car’s published kerb mass,
rated power and drivetrain, then fitted to its own published acceleration figures.
Dry asphalt, 20 °C, sea level, 1 ft rollout.
Audi A6 4.2 quattroAudi Q8 55 TSFI V6 340
Watch the run in full — then change the surface, the weather
or the distance and run it again.
Down the strip
Standing start
Audi A6 4.2 quattro
Audi Q8 55 TSFI V6 340
0–60 mph
5.72 s
5.28 s
0–100 mph
—
—
60 ft
2.31 s
1.99 s
1/8 mile
9.22 s
8.81 s
1/4 mile
14.26 s
13.83 s
Trap speed
98.8 mph
99.0 mph
Each car is trimmed to its own published figures —
10/10 for the Audi A6 4.2 quattro,
2/2 for the Audi Q8 55 TSFI V6 340 —
so a heavier car can still be the quicker one if that is what it tests.
Is the Audi A6 4.2 quattro or the Audi Q8 55 TSFI V6 340 faster?
The Audi Q8 55 TSFI V6 340. Over a standing quarter mile it runs 13.83 s to the Audi A6 4.2 quattro's 14.26 s, a margin of 0.43 s, and it reaches 60 mph in 5.28 s against 5.72 s. These are theoretical times from a physics simulation, not measured runs.
What is the Audi A6 4.2 quattro 0-60 time?
The Audi A6 4.2 quattro reaches 60 mph in 5.72 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. It covers the standing quarter mile in 14.26 s at 98.8 mph.
What is the Audi Q8 55 TSFI V6 340 0-60 time?
The Audi Q8 55 TSFI V6 340 reaches 60 mph in 5.28 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. It covers the standing quarter mile in 13.83 s at 99.0 mph.
What trap speed does each car run?
The Audi A6 4.2 quattro trips the lights at 98.8 mph and the Audi Q8 55 TSFI V6 340 at 99.0 mph at the end of the quarter mile. These are theoretical times from a physics simulation, not measured runs.
Are these real measured times?
No. Every time on this page is produced by a physics simulation, not by a stopwatch at a drag strip. Each car is modelled from its published kerb mass, rated power, drivetrain and gearing, then trimmed until it matches its own published acceleration figures — 10 of 10 for the Audi A6 4.2 quattro and 2 of 2 for the Audi Q8 55 TSFI V6 340. Conditions are identical for both cars: dry asphalt, 20 °C, sea level, 1 ft rollout.
Figures regenerated 2026-10-12. Every number on this page is computed by the simulator at build time, so the page and the app can never disagree.