Audi Q3 Facelift 1.4 TSFI 150 vs Infiniti QX50 2.0 CVT 268
Over a standing quarter mile on dry asphalt the Infiniti QX50 2.0 CVT 268 is the quicker car,
covering it in 14.58 s at
97.7 mph against the Audi Q3 Facelift 1.4 TSFI 150’s
16.42 s — a margin of
1.84 s. To 60 mph the Infiniti QX50 2.0 CVT 268 takes
6.01 s and the Audi Q3 Facelift 1.4 TSFI 150
8.25 s.
Simulated, not measured — computed from each car’s published kerb mass,
rated power and drivetrain, then fitted to its own published acceleration figures.
Dry asphalt, 20 °C, sea level, 1 ft rollout.
Audi Q3 Facelift 1.4 TSFI 150Infiniti QX50 2.0 CVT 268
Watch the run in full — then change the surface, the weather
or the distance and run it again.
Down the strip
Standing start
Audi Q3 Facelift 1.4 TSFI 150
Infiniti QX50 2.0 CVT 268
0–60 mph
8.25 s
6.01 s
0–100 mph
—
—
60 ft
2.54 s
2.47 s
1/8 mile
10.55 s
9.54 s
1/4 mile
16.42 s
14.58 s
Trap speed
83.6 mph
97.7 mph
Each car is trimmed to its own published figures —
2/2 for the Audi Q3 Facelift 1.4 TSFI 150,
2/2 for the Infiniti QX50 2.0 CVT 268 —
so a heavier car can still be the quicker one if that is what it tests.
Is the Audi Q3 Facelift 1.4 TSFI 150 or the Infiniti QX50 2.0 CVT 268 faster?
The Infiniti QX50 2.0 CVT 268. Over a standing quarter mile it runs 14.58 s to the Audi Q3 Facelift 1.4 TSFI 150's 16.42 s, a margin of 1.84 s, and it reaches 60 mph in 6.01 s against 8.25 s. These are theoretical times from a physics simulation, not measured runs.
What is the Audi Q3 Facelift 1.4 TSFI 150 0-60 time?
The Audi Q3 Facelift 1.4 TSFI 150 reaches 60 mph in 8.25 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. It covers the standing quarter mile in 16.42 s at 83.6 mph.
What is the Infiniti QX50 2.0 CVT 268 0-60 time?
The Infiniti QX50 2.0 CVT 268 reaches 60 mph in 6.01 s, simulated on dry asphalt at 20 °C with a 1 ft rollout. It covers the standing quarter mile in 14.58 s at 97.7 mph.
What trap speed does each car run?
The Audi Q3 Facelift 1.4 TSFI 150 trips the lights at 83.6 mph and the Infiniti QX50 2.0 CVT 268 at 97.7 mph at the end of the quarter mile. These are theoretical times from a physics simulation, not measured runs.
Are these real measured times?
No. Every time on this page is produced by a physics simulation, not by a stopwatch at a drag strip. Each car is modelled from its published kerb mass, rated power, drivetrain and gearing, then trimmed until it matches its own published acceleration figures — 2 of 2 for the Audi Q3 Facelift 1.4 TSFI 150 and 2 of 2 for the Infiniti QX50 2.0 CVT 268. Conditions are identical for both cars: dry asphalt, 20 °C, sea level, 1 ft rollout.
Figures regenerated 2026-10-12. Every number on this page is computed by the simulator at build time, so the page and the app can never disagree.